Protected by Chirp
Chirp-Edge uses a similar approach to conventional EAS systems. The setup is a 14cm x 14cm Hub working in tandem with a series of Tags. But in opposite fashion to Chirp-Zone, the key difference with Chirp-Edge is that a Tag will alarm if it is taken too close to the Hub. So in practical terms you position the hub at an exit, and if a tagged product is taken too close to the exit then it will alarm until deactivation.
The wireless nature of this technology means that products can be picked up, inspected, even tried on but, importantly, kept safe within your four walls.
You can use Chirp-Edge in any Bricks and Mortar building with an entrance/exit and choose at which exact point the Tags alarm.
The Hub is the heartbeat of the system, using RF to communicate with each of the tags in your setup.
You can set it up in minutes any time, any place. You can even use multiple hubs together to extend the range by creating a web.
The Hub measures approx. 14cm x 14cm and casts a wireless zone of up to 5 metres.
Our main tag is a Lanyard style which loops around the product you wish to protect. We offer varying lengths of cables as optional accessories and we are developing new tag varieties. We also supply a Surface tag which you stick to a product, engaging a pressure switch and also a Wrap tag that you, well, wrap around a product.
With the Chirp-Edge system, if a Tag is taken too close to the Hub then an alarm will sound in the Tag until you deactivate it using the Remote.
Chirp-Edge uses a similar approach to conventional EAS systems. The setup is a 14cm x 14cm Hub working in tandem with a series of Tags. But in opposite fashion to Chirp-Zone, the key difference with Chirp-Edge is that a Tag will alarm if it is taken too close to the Hub. So in practical terms you position the hub at an exit, and if a tagged product is taken too close to the exit then it will alarm until deactivation.
The wireless nature of this technology means that products can be picked up, inspected, even tried on but, importantly, kept safe within your four walls.
You can use Chirp-Edge in any Bricks and Mortar building with an entrance/exit and choose at which exact point the Tags alarm.
The Hub is the heartbeat of the system, using RF to communicate with each of the tags in your setup.
You can set it up in minutes any time, any place. You can even use multiple hubs together to extend the range by creating a web.
The Hub measures approx. 14cm x 14cm and casts a wireless zone of up to 5 metres.
Our main tag is a Lanyard style which loops around the product you wish to protect. We offer varying lengths of cables as optional accessories and we are developing new tag varieties. We also supply a Surface tag which you stick to a product, engaging a pressure switch and also a Wrap tag that you, well, wrap around a product.
With the Chirp-Edge system, if a Tag is taken too close to the Hub then an alarm will sound in the Tag until you deactivate it using the Remote.
